European mill
Author: Zhengzhou Qingshan Information Technology Co., Ltd. date: December 24, 2019 popularity: 10
Product introduction
Our company's long-term energy-saving roller mill is the combination of our high-end grinding machine, energy-saving roller mill, and has many advantages in the production of high-end grinding machine. It is widely used in mining, building materials, electric power, road and bridge, coal, metallurgy, chemical industry, ceramics, refractory and other industries.
??? This European mill can grind limestone, calcite, marble, dolomite, talc, barite, quartz, fluorite, phosphate rock, feldspar, iron ore, activated clay, kaolin, bentonite, fly ash, furnace bottom slag, gypsum, glass, thermal insulation materials, coal powder, petroleum coke, Mohs hardness below 9.3, humidity below 6%, etc Fine powder processing of more than 300 kinds of materials in industry, construction and other industries. The particle size of the finished product can be adjusted within 425-600 mesh.
working principle
The whole structure of European pulverizer is composed of main engine, fineness analyzer, blower, cyclone powder collector, pulse dust collector and pipeline device. Its accessory equipment can be equipped with jaw crusher, dustpan elevator, frequency conversion belt feeder, electric control cabinet and other equipment according to the actual needs of customers.
?
??? Working process: after the large pieces of materials are crushed to the required size by jaw crusher, the hoister will send the materials to the storage hopper, and then the frequency conversion belt feeder will be continuously, evenly and quantitatively sent to the grinding room of the main machine for grinding. The ground powder will be graded by the analyzer along with the air flow of the fan, and the fine particles will flow through the pipeline into the bypass cyclone collector for separation From the collection, and then through the powder discharge solenoid valve is the finished powder. The airflow is sucked into the blower by the return air duct at the upper end of the bypass cyclone collector. The whole air flow system of this machine is closed circulation and flows under positive and negative pressure.
Highlight advantages
Strong systematicness and high passing rate
The whole machine has three-dimensional structure, small floor area and strong systematicness. It can form an independent production system from raw material coarse crushing to milling and packaging. The fineness of finished product powder is uniform and the passing rate is as high as.
Stable transmission, high wear resistance
It has high wear resistance, high reliability, high wear resistance and high cost.
Easy to control and maintain
With centralized control of the electrical system, the workshop can basically achieve unmanned operation. Electromagnetic vibration feeder feeding, continuous and uniform, easy to adjust, save oil and electricity, convenient maintenance.
Mature equipment, many models, to meet the needs of various production
The output can reach 1.0 tons per unit after several decades of development.
technical parameter
model |
Feed size (mm) |
Fineness of finished product (mm) |
Output (T / h) |
Speed (R / min) |
Grinding ring (mm) |
Roller diameter (mm) |
Roller height (mm) |
Mill (roll) |
Main motor (kw) |
Fan motor (kw) |
Powder separation power (kw) |
YGM110 |
≤30 |
0.18-0.038 |
2-10 |
one hundred and three |
one thousand and one hundred |
three hundred and sixty |
one hundred and ninety |
four |
fifty-five |
fifty-five |
seven point five |
YGM130 |
≤30 |
0.18-0.038 |
2.5-13.8 |
one hundred and three |
one thousand two hundred and eighty |
four hundred and ten |
two hundred and ten |
five |
seventy-five |
seventy-five |
seven point five |
YGM138 |
≤30 |
0.18-0.038 |
2.9-17.5 |
ninety-six |
one thousand three hundred and eighty |
four hundred and sixty |
two hundred and forty |
five
|
ninety |
one hundred and ten |
twenty-two |
YGM160 |
≤35 |
0.18-0.038 |
5-25 |
ninety-two |
one thousand and six hundred |
four hundred and eighty |
two hundred and eighty |
five |
one hundred and thirty-two |
one hundred and sixty |
thirty |
YGM175 |
≤40 |
0.18-0.038 |
7-30 |
seventy-five |
one thousand seven hundred and fifty |
five hundred and twenty |
two hundred and eighty |
five |
one hundred and eighty-five |
two hundred |
thirty-seven |
Note: the above technical parameters are subject to change without prior notice, subject to the current new technical parameters of our company, and can be customized according to the user's requirements.
Engineering cases
-
3 tons of calcium carbonate grinding powder production line customer site
major equipment : jaw crusher, bucket elevator, electromagnetic vibration feeder, 4r3216 Raymond mill, cyclone dust collection system, bag filter system, etc;
Grinding materials Below: 15cm
Fineness of finished product : 300 mesh
yield :2.5-3.5t/h
-
5 ton bauxite mill production line
major equipment : 250 × 400 jaw crusher, bucket elevator, electromagnetic vibration feeder, 5r421 Raymond mill, cyclone dust collection system, pulse dust removal system, etc;
Grinding raw materials : bauxite, below 20cm
Fineness of finished product : 325 mesh
yield :4.5-5.5t/h
Related product recommendation
Learn more Please leave your contact information and we will contact you within 24 hours: Tel: 13721431212 (micro signal) 0371-56630331